This week Wonho and I attached the mirror to our mirror frame. We ended up simply taping the four corners of the mirror onto the four corners of our mirror frame because the mirror bends a lot as the mirror is made of acrylic. In a well-lit environment, it is possible to see through the front of the mirror which is not what we want, so we have decided (as a temporary solution) to use the cardboard box that the mirror came in to cover the back of our smart mirror and block any light from coming in through the back. I tried putting my phone behind the mirror and setting it at a full brightness level to test if the smart mirror would still be able to show the monitor display and it is visible as expected.
We are running into some trouble with the Xavier not being able to recognize that we have a camera input. A week ago, we had no issues with this but they appeared out of nowhere. We tried switching out the CSI cables, reading through troubleshooting threads online and it still would not work. This is the only obstacle that is preventing us from testing out trtpose and I am planning to go in on either Sunday/Monday to get this working again.
I would say that we are slightly behind schedule, but as long as we get trtpose working before the interim demo, then we should be in a very good spot to finish up during the last two weeks of this semester.