My accomplishments this week:
-
- Revision 1. jointly reflowed with Stan
- Relevant PR’s reviewed and merged for SPI transmission, heatshrink interface
- Got Cameron up-to-speed on testing his code on our toolchain (previously just running tests standalone)
- Reworded Rev. 1, tested, electrically solid
- Made a list of changes for Rev. 2 (will actually need to happen now, I definitely frigged some things up)
- Change both ribbons to slide connectors
- Shorten header to make sure it clears
- Order shorter ribbon (can’t cut to length, I’m dumb)
- Improve pitching on breakout pins (embiggen)
- Remove/move poorly placed designators
- Fix 0201 Caps in BOM
- Add connector, headers to BOM
- Expand transceiver board ground pour to mounting hole
- Consider moving power delivery off ribbon
- Move resistor
- Add reset caps to gnd
- Move connector back from the lip if possible
- Renumber designators across boards
My personal deliverables for next week:
- A revised Rev. 1 (Rev. 2)
- Rev. 2 ordered by end-of-week
- Investigation into board mount/spacers/enclosure
Updates on last week’s deliverables:
- I’ve reviewed a decent chunk of the codebase, but I still need to get more intimately involved with Cameron’s interfaces and the UART driver
- See above for board status