This week I finalized the specifics of the board. Each square will be laser cut into 2×2 inches using green and white translucent acrylic sheets. The squares will be welded together using acrylic weld on glue. An 8×8 RGB LED matrix will be installed under the board. The front of the board will be laser cut to fit the push button and LCD screen in.
My goal for this week was to have the squares ready. It is important for us to have the top of the board as soon as possible so Anoushka and Yoorae can start testing with CV. However, the acrylic sheets have not arrived yet. In the meantime, I made a drawing for the squares using SolidWorks, so I will be able to laser cut the squares as soon as the sheets arrive.