This week’s accomplishments
- Wrote, edited, and formatted the design report. Specifically, these were my responsibilities on the report:
- hardware architecture
- Introduction
- gantry subsystem implementation
- water heating and distribution subsystem implementation
- scale subsystem implementation
- risk mitigation
- BOM
- Formated, edited, and submitted the final report
- Attended mandatory lab
- Pump flow and current testing
- will need to test further to fully understand the relation between current and flow rate.
Next week’s plan (spring break)
- Will be traveling, so I have limited time to work hands-on with the project
- However, will be looking to successfully run OctoPrint on my personal Rpi to communicate with the 3-D printer
- Experiment with different flow rates (and how much current each rate requires)
Status Report: On schedule