Most of my work time this week was spent on preparing the proposal presentation. Including fleshing out requirements and quantitative measures for it, diagrams, and creating the slides themselves. I worked with my teammates over calls to flesh it out. My team all agreed that I would be presenting the proposal presentation. I spent time practicing to make sure I explained the project in a clear manner, not just directly reading from the slides, and asking my teammates about their parts of the project so that I had a thorough understanding of all of the elements.
Decided on scanner and library – I did research on what software libraries could potentially work for our project, particularly what libraries were available to command scanners. I found one called Naps2 that should work for any popular brand of scanner. I also decided on a scanner to buy, it’s a 4800 dpi Cannon scanner. 4800 dpi is plenty of detail for the scans, Cannon is a very common brand, and the scanner is small and shouldn’t be too difficult to move or store. It’s also less than $100, which leaves plenty of budget for materials for the hardware of our device.
My progress is currently on schedule. Next week, I will start into using the Naps2 library and creating the software that would interact directly with the scanner sending commands, would receive those scans, and then send them to Yon’s image processing software. Depending how far I get, I could even start unit testing it. Hopefully it will be in a decent state by the time the scanner is ordered and arrives for practical testing.