- What did you personally accomplish this week on the project? Give files or
photos that demonstrate your progress. Prove to the reader that you put sufficient
effort into the project over the course of the week (12+ hours).
At the start of the week, I spent a lot of time setting up my environment for React Native development (I ran into a lot of problems during set up, but was able to figure them out). After this, I did some work on addressing the feedback we had received from our last presentation. I found the 3-A sanitary standards for sensors (https://www.omega.com/en-us/resources/3a-sensors-sanitary-applications ), which I used to updated our use-case requirements. I also updated other use case requirements on which we had received feedback. Then, I worked on the slides for the design review and on rehearsing the presentation. I also did an initial draft (in bullet points) of our design review writeup.
In the meantime, as a team, we analyzed some more materials for the project, and I placed most of the orders and tracked them in the BOM. Finally, I did some more reading on React Native and Arduino bluetooth interaction and analyzed options for libraries to use in this space.
- Is your progress on schedule or behind? If you are behind, what actions will betaken to catch up to the project schedule?
My progress is on schedule.
- What deliverables do you hope to complete in the next week?
By next week, we should receive our second bluetooth-capable Seeed board. Once I have that (which should be on Monday), I will use it to test bluetooth code from the arduino end. I will also work on adding boilerplate code for the React Native Bluetooth interaction. Finally, I will (in collaboration with other team members) turn the Design Review draft into a much more developed version (as it is due on the 31st), incorporating the feedback we receive in our Design Review presentation.