- Build the high pass filter circuit and connected the high pass filter circuit with the loss pass filter circuit. Had to put some resistors in series in order to achieve the desired frequency cutoffs. Also, soldered the 3.5mm breakout with metals pins so that the breakout could be put in the breadboard and connect to the breadboard.
- The schedule is on progress.
- Plans for the upcoming week is to test the low pass and high pass filter, connect the breakout with the circuit using wires, and also connect the microphone to the breakout and circuit. Then test the circuit again after connection the microphone is implemented.
Carnegie Mellon ECE Capstone, Fall 2019