Found/ordered all main components need for breadboarding and prototyping, so that we can begin development and integration of the sensors ahead of when we get the hardware. These components include the MPU6050, haptic motor controller, and the DonkeyCar.
Moved development for the STM32 onto the STM32CubeIDE and development for the ESP32 to Arduino IDE. Got FreeRTOS running on the STM32 that was able to print debug messages and blink LEDs in different tasks.
Design Changes
Due to the higher-than-expected costs of PCB manufacture, we have decided to cut the PCB for supporting the IMU attached to the user’s finger. It is simply much cheaper to use a SPI-enabled adafruit IMU breakout board, and connect that to our custom glove PCB than to make both ends custom.
Risks & Risk Management
There seems to be a conflict with enabling both FreeRTOS and the WPAN BLE Stack on the STM32 that could be due to both the Sequencer (ST’s bare-metal task scheduler) and FreeRTOS running on the same core (Cortex-M4). We may need to look into another microcontroller or research additional workarounds to get an RTOS and BLE enabled on the kar.
